SONY Line Array Speaker SLS-1A, 8x10 W

Druh TV príslušenstva:Reproduktory.... viac
Bežná cena: 2 110  (-2%)
1 711.57 € bez DPH
Na dotaz
2 071 €
ks
Vyberte si zvýhodnené balenie
Množstevné zľavy
Popis a parametre

SONY Line Array Speaker SLS-1A, 8x10 W

Sony konferenční reporoduktor
Pozor, není prodáváno jako sada - pouze jako 1 ks.


System
Frequency Range
80Hz-20kHz
*Frequency characteristic measured at anechoic chamber
Horizontal Dispersion
200 degrees
*1 - 4k average?-6 dB *At Vertical style (Vertical Dispersion at Horizontal style
Vertical Opening Angles
Software Adjustable:
1 Module: Max 40 degrees
2 Modules: Max 50 degrees
3 Modules: Max 60 degrees
4 Modules: Max 70 degrees
5 Modules: Max 80 degrees
6 Modules: Max 90 degrees
*At Vertical style(Vertical Opening Angles at Horizontal style)
Vertical Beam Steering Angles
1 Module: 20 degrees
2 Modules: 20 degrees
3 Modules: 30 degrees
4 Modules: 30 degrees
5 Modules: 40 degrees
6 Modules: 40 degrees
*At Vertical style(Vertical Opening Angles at Horizontal style)
Maximum SPL (1 m)
1 Module: 105 dB (peak 112 dB)
2 Modules: 111 dB (peak 118 dB)
3 Modules: 115 dB (peak 122 dB)
4 Modules: 117 dB (peak 124 dB)
5 Modules: 119 dB (peak 126 dB)
6 Modules: 121 dB (peak 128 dB)
* Max SPL calculated based on free-field sensitivity, and without beam steering, spreading applied.
Peak SPL (30 m)
1 Module 97 dB
2 Modules: 103 dB
3 Modules: 107 dB
4 Modules: 109 dB
5 Modules: 111 dB
6 Modules: 113dB
* Assumption signal loss at 30 m and 15 dB
Typical Usable Throw Distance
1 Module: 4m
2 Modules: 8m
3 Modules: 12m
4 Modules: 16m
5 Modules: 20m
6 Modules: 25m
*Typical Maximum Usable Throw Distance includes considerations for reverberation and speech intelligibility
Low-frequency Beam Control Limit
1 Module: 1.25 kHz
2 Modules: 630 Hz
3 Modules: 400 Hz
4 Modules: 315 Hz
5 Modules: 250 Hz
6 Modules: 200 Hz
Enclosure type
Bass reflex type
Driver
Flat and Square speaker unit, 35 mm x 35 mm (1 7/16 in × 1 7/16 in) Full range x 8
Magnetic shielding
No
Dust and water resistant
No
Amplifier Channels /
Rated Power
Power Output (rated)
10 W x 8 channels (at 6 ohms, 1 kHz, 1 % THD)
Amplifier type
Class-D
Protection circuit
Speaker Processing: Clipping limit
Amplifier: Terminal shutdown/Overheat protection/Over voltage protection/Under voltage lock out/DC protection
Power: Overload protection/Overheat protection
Electric performance
Power (AC) Voltage
Universal
AC 100 V - 240 V, 50 Hz/60 Hz
Power (AC) Connector
IEC60320-C7
Power Consumption
87 W/Standby 7W (Dante IN or Dante OUT: 1port), 8 W(Dante IN and Dante OUT: 2ports)
Input/Output
Analog Audio Input
Euro type terminal block (Pitch 3.81 mm, 3-pin, Green)
Analog Audio Maximum Input Level (4 stages)
Balance connection: +8.2 dBu(2Vrms)/+12 dBu/+18 dBu/+24 dBu
Unbalance connection: +8.2 dBu(2Vrms)/+12 dBu/+18 dBu
Input Sensitivity (4 stages)
Balance connection: +8.2 dBu(2 Vrms)/+12 dBu/+18 dBu/+24 dBu
Unbalance connection: +8.2 dBu(2 Vrms)/+12 dBu/+18 dBu
Input Impedance
Balance connection: 94 k? / Unbalance connection: 47 k?
Digital Audio Inputs
1-channel of Dante digital audio network (RJ-45)
*8-chnannel of Dante digital audio network (RJ-45) is possible
Digital Audio Outputs
1-channel of Dante digital audio network (RJ-45) *8-chnannel of Dante digital audio network (RJ-45) is possible
Power(DC) Input/Output
Euro type terminal block (Pitch 5.08 mm, 4-pin, Black/Green)
DIP Switch
Select preset beam setting and Dante® input channel (1ch/8ch)
(Integrated DSP)
A/D and D/A Converters
24-bit, 96 kHz
FIR Filter Support
1024 tap @ 96 kHz
Audio Latency
13 mS
Physical specification
Enclosure
Cabinet: Extruded aluminum (powder coated)
Side/Back panel: Plastic
Grille
Punching metal steel plate (Painted)
Indicators
Status, Signal, LAN
Operating Temperature Range (Ambient)
0 ? - 40 ?
Cooling System
Cooling is passive only
Environmental
Indoor only
Install
Integrated speaker brackets; allows horizontal yaw to 0-degree or 10-degree direction
Dimensions(w×h×d)(approx.)
384 mm x 92 mm x 100 mm (15 1/8 in x 3 5/8 in x 4 in) (without speaker grill)
384 mm x 92 mm x 110 mm (15 1/8 in x 3 5/8 in x 4 3/8 in) (with speaker grill)
Mass (approx.)
4 kg (8 lb 14 oz) (with speaker grill)
Power(DC) Input/Output
Euro type terminal block (Pitch 5.08 mm, 4-pin, Black/Green)
Included Accessories
Speaker grille (attached to the speaker) (1), Power cord (1), Power cascade cable (Euro type terminal block) (1), Ethernet cable for audio signal cascade (RJ-45) (1), 3-pin Euro type terminal block header (1), Speaker bracket(no slant) (2), Speaker bracket (10-degree slant) (2), Speaker joint bracket (no slant) (1), Speaker joint bracket (10-degree slant) (1), Wall mounting bracket (1), Metal joint fitting for wall mounting brackets (1), Detachment stopper (2), Metal joint fitting for attaching a safety wire (2), Cable clamp (2), Spacer pad A (2), Spacer pad B (1), 4×10 screw with washer (9), Shoulder screw (2), Operating Instructions (this manual) (1), Reference Guide (1), Warranty card (1)
.
Typ příslušenství
Reproduktory / soundbar

SONY Line Array Speaker SLS-1A, 8x10 W

Email, na ktorý Vám príde odpoveď
Zadajte kontaktný telefón
Vaše prianie, aspoň 3 znakov
' '
Opíšte kód z obrázku tak, ako ho vidíte
Sledovanie produktu
Zadajte podmienky a e-mail, na ktorý chcete poslať správu, keď sú tieto podmienky splnené
Naposledy navštívené
DATASEP s.r.o.
Bulharská 70
821 04 Bratislava
Slovenská republika
IČO: 35844655
IČ DPH (DIČ): SK2020263047
Ďalšie informácie
Textové stránky